DFI 40800950 User Manual

51

3

Award BIOS Setup Utility

Auto The BIOS will automatically set the system according to

your hard disk drive’s timing.

0-4 You can select a mode that matches your hard disk drive’s

timing. Caution: Do not use the wrong setting or you will

have drive errors.

IDE Primary Master/Slave UDMA and IDE Secondary Master/

Slave UDMA

These categories allow you to set the Ultra DMA in use. When Auto

is selected, the BIOS will select the best available option after

checking your hard drive or CD-ROM.

Auto

The BIOS will automatically detect the settings for you.

Disabled The BIOS will not detect these categories.

USB Controller

We recommend that you leave this field in its default setting -

Enabled.

USB Keyboard Support

By default, USB Keyboard Support is Disabled. However, if you are

using a USB keyboard under DOS, make sure to enable this

function.

Init Display First

This field is used to select whether to initialize AGP or PCI first

when the system boots.

AGP

When the system boots, it will first initialize AGP.

PCI Slot

When the system boots, it will first initialize PCI.

Onboard Audio Controller

Set this field to Disabled if you wish to install an audio add-in card.

IDE HDD Block Mode

Enabled The IDE HDD uses the block mode. The system BIOS

will check the hard disk drive for the maximum block

size the system can transfer. The block size will depend

on the type of hard disk drive.