DFI 40800950 User Manual

Award BIOS Setup Utility

Disabled The IDE HDD uses the standard mode.

Keyboard/Mouse Power On

This field allows you to use the keyboard or PS/2 mouse to power-

on the system. To use this function, make sure JP1 is set to 2-3 On -

the Wake-On-Keyboard/Mouse function enabled. Refer to Jumper

Settings for Wake-On-Keyboard/Wake-On-Mouse in chapter 2 for

more information.

Disabled

Default setting.

Warning:

If JP1 was previously enabled with a pass-

word set in the KB Power On Password field,

and now you wish to disable the keyboard

password function, make sure to set this field

to disabled prior to setting JP1 to disabled

(1-2 On). You will not be able to boot up the

system if you fail to do so.

Password

When this option is selected, move the cursor to

the KB Power On Password field and press

<Enter>. Enter your password. You can enter up to

5 characters. Type in exactly the same password to

confirm, then press <Enter>.

Important:

The power button will not function once a

keyboard password has been set in the KB

Power On Password field. You must type the

correct password to power-on the system. If

you forgot the password, power-off the

system and remove the battery. Wait for a

few seconds and install it back before

powering-on the system.

Hot Key

When this option is selected, move the cursor to

the KB Power On Hot Key field to select a

function key you would like to use to power-on the

system. The options are from Ctrl-F1 to Ctrl-F12.

Mouse Left When this option is selected, double-click the left

button of the mouse to power-on the system.

Mouse Right When this option is selected, double-click the right

button of the mouse to power-on the system.

Any Key

Press any key to power-on the system.