Advantech PCA-6186 User Manual
35
Chapter 3
3.5.13 On-Chip Frame Buffer Size
User can select frame buffer size. Option is 8MB and 1MB.
3.5.14 Boot Display
User can select VGA controller when system is power on. The choice:
Auto, PCI, AGP. PCI (external VGA card). AGP (onboard VGA con-
troller).
Auto, PCI, AGP. PCI (external VGA card). AGP (onboard VGA con-
troller).
3.6 Integrated Peripherals
3.6.1 IDE Primary (Secondary) Master/Slave PIO/UDMA
Mode,
Mode,
IDE Primary (Secondary) Master/Slave PIO/UDMA Mode (Auto) Each
channel (Primary and Secondary) has both a master and a slave, making
four IDE devices possible. Because each IDE device may have a different
Mode timing (0, 1, 2, 3, 4), it is necessary for these to be independent.
The default setting “Auto” will allow autodetection to ensure optimal per-
formance.
channel (Primary and Secondary) has both a master and a slave, making
four IDE devices possible. Because each IDE device may have a different
Mode timing (0, 1, 2, 3, 4), it is necessary for these to be independent.
The default setting “Auto” will allow autodetection to ensure optimal per-
formance.
3.6.2 On-Chip Secondary PCI IDE
If you enable IDE HDD Block Mode, the enhanced IDE driver will be
enabled. Leave IDE HDD Block Mode on the default setting.
enabled. Leave IDE HDD Block Mode on the default setting.
Figure 3.5: Integrated peripherals (1)