Symmetricom 1100 User Manual

Chapter 4 Provisioning the TimeProvider
Provisioning the IOC

106  TimeProvider User’s Guide

SET-SYS-MODE:::TS1000::SYSMODE=SUB;

Sets the system mode to Subtending (SUB). The inputs are set as described in the 
table above. Record the mode in 

TP-SSU 03-10-24 10:40:10

A 1176 REPT EVT

“SYS,EQPT:NA,SYSMODE,NSA,03-10-24 10-40-10:\"SYSTEM MODE 

OF OPERATION HAS CHANGED,SUB\””

;

Retrieving the Current System Mode
Use the RTRV-SYS-MODE command to retrieve the current system mode: SSU, 
SUB, or PRR.

RTRV-SYS-MODE:[<tid>]::[<ctag>];

This command has a default access level of USER.

RTRV-SYS-MODE:::TS1000;

TP-SSU 03-10-24 10:37:54

M

TS1000 COMPLD

SSU

;

SYSMODE 
(cont’d)

SUB

Set the TimeProvider to Subtending operating mode

PRS – Monitor only and Disabled, cannot be 
Enabled

INP1 – Priority 1 and Enabled

INP2 – Priority 2 and Enabled

GPS – Monitor only and Disabled, cannot be 
Enabled

SSU

PRR

Set the TimeProvider to Primary Reference 
Receiver mode

PRS – Enabled as Backup Reference, can be 
set to Monitor or Disabled

INP1 – Enabled as Backup Reference, can be 
set to Monitor or Disabled

INP2 – Enabled as Backup Reference, can be 
set to Monitor or Disabled

GPS – Enabled and Priority 1