Symmetricom 1100 User Manual

Chapter 4 Provisioning the TimeProvider
Provisioning the Input Reference

110  TimeProvider User’s Guide

TP-SSU 03-10-24 10:45:15

A 1179 REPT EVT

“GPS,EQPT:NA,FRMTYPE,NSA,03-10-24 10-45-15:\"GPS LOCATION 

HAS CHANGED,MANUAL\””

;

Use the ED-SYNC command to provision the input PRS frequency.

ED-SYNC:[<tid>]:<aid>:[<ctag>]::<keyword>=<value>;

This command has a default access level of ADMIN.

ED-SYNC::PRS:TS1000::FRMTYPE=5M;

TP-SSU 03-10-24 10:46:01

A 1179 REPT EVT

“PRS,EQPT:NA,FRMTYPE,NSA,03-10-24 10-46-01:\"INPUT 

FRAMING TYPE HAS CHANGED,5M\””

;

Use the ED-SYNC command to provision the type of framing present on the input 
signal.

ED-SYNC:[<tid>]:<aid>:[<ctag>]::<keyword>=<value>;

If you provision the TimeProvider to the Subtending mode (see 

, on page 105), then the input frame type is automatically set to Composite 

Clock type signals. You can set the FRMTYPE to CC, JCC, or JCC4 when the 
TimeProvider is in the Subtending mode.

When using E1 signals in the SSU mode, you can enter either CAS or CCS in the 
FRMTYPE keyword. The TimeProvider accepts both CCS and CAS inputs without a 
fault (if the input is fault-free).

This command has a default access level of ADMIN.

PRS

FRMTYPE

1.544 M | 2M | 5M | 
6.312 M | 10M

Provisions the input 
frequency of the PRS input

2M