Symmetricom 1100 User Manual

Chapter 4 Provisioning the TimeProvider
System Commands

138  TimeProvider User’s Guide

SNMP v3
To set up Notifications, create an SNMP v3 user with or without MD5 or SHA using 
the ENT-USER-SECU command. DO not add the engineid. Add a MGRx and 
SENDERx using the ED-EQPT command. Set the IFTOUTx and IFRETRYx 
parameters to 0.

To set up Informs, create an SNMP v3 user with or without MD5 or SHA using the 
ENT-USER-SECU command. Include the engineid of the manager engine. Add a 
MGRx and SENDERx using the ED-EQPT command. Set the IFTOUTx and 
IFRETRYx parameters to a nonzero value.

This section describes the TL1 commands you use to perform the following routine 
operations with the TimeProvider:

Displaying events

Displaying the current configuration

Restarting the TimeProvider

The RTRV-LOG command displays all the events in the event log in chronological 
order (first in - first out). The event log contains the 500 most recent alarmed and 
non-alarmed events. Alarms with an alarm level of NONE are not stored in the log.

RTRV-LOG:[<tid>]:[<aid>]:[<ctag>][::<keyword>=<value>];

This command has a default access level of USER.

RTRV-LOG::INP1:TS1000::ALM;

This command causes the TimeProvider to return all alarms stored in the log for 
Input 1.

ALL (or null)
IMC
IOC
IOCm (m = 1 | 2)
GPS
PRS
INPp (p = 1 | 2)
OUTg (g = A | B | C | D)

All (or null)

Displays both events and alarms stored in the 
log for the specified aid

EVT

Displays events stored in the log for the 
specified event

ALM

Displays alarms stored in the log for the 
specified event