Xerox 7335 User Manual

175

1.

With the Authentication Configuration web page still running, click Configure next to the server you 
wish to use for Authentication.  If not still running, perform steps 2 and 3 below.

2.

If the web page is not still running, open your Web browser and enter the TCP/IP address of the 
machine in the Address or Location field. Press Enter.

3.

Click the Properties tab and return to the Security folder.

4.

Select the Remote Authentication Server / Directory Service folder in the list of hot links, select 
Authentication System and pick SMB from the drop-down list.  Click Apply.

5.

Select SMB Server Settings.

6.

From the SMB Server Setup drop-down menu, select your desired method.  The selections include: 
By Domain Name, and By Domain Name and Server Address / IP Address.

7.

Enter the Domain name (up to 15 characters) in the SMB Server – Domain Name box, for every 
Domain Controller specified.  This entry is required regardless of the selection made from the SMB 
Server Setup drop-down menu.

8.

Enter the IP Address of the Domain Controller in the SMB Server – Server Name / IP Address box (if 
By Domain Name and Server Address / IP Address was selected for SMB Server Setup).

9.

Enter the IP Addresses of up to 4 additional Backup Domain Controllers, if applicable.

10. If you choose not to enter IP addresses, enter the Server Name (up to 64 characters) in the SMB 

Server – Server Name / IP Address box (if By Domain Name and Server Address / IP Address was 
selected for SMB Server Setup).

11. Click Apply, and supply the Administrator User name and password if prompted.