Xerox 7335 User Manual

176

Refer to your LDAP server documentation for the full range of information that can be entered into this 
LDAP dialog to fully support both E-mail applications and authentication using your LDAP server.

The path to the LDAP dialog is as follows:

1.

With the Authentication Configuration web page still running, click Configure next to the server you 
wish to use for Authentication.  If not still running, perform steps 2 and 3 below.

2.

If the web page is not still running, open your Web browser and enter the TCP/IP address of the 
machine in the Address or Location field. Press Enter.

3.

Click the Properties tab.

4.

Click the Connectivity folder, then the Protocols folder, then the LDAP folder.

5.

Select LDAP Directory.

6.

Click LDAP Server, and under Server Information, enter the  IP address (or host name) in the box 
supplied.  Note: If entering a fully qualified host name (for example, ldapserver.xerox.com), make sure 
that the specified domain name matches the device’s TCP/IP configuration (domain name shown 
under DNS on the device’s Configuration Report). 

7.

Enter the Port Number (default of 389).

8.

If available, decide whether or not to use encryption (Authentication with SSL) when accessing the 
LDAP server.

9.

Specify the LDAP Server environment from the Server Application drop-down list.

10. If desired, enter the path to the LDAP objects to limit the LDAP search in the [Search Directory Root] 

area.  The entry should be in base DN format (for instance, ou=people, dc=xerox, dc=com).

11. For Login Name and Password, enter the machine’s Login Name and Password (if required) in the 

boxes provided.  Note that, quite often, to simply supply address information for E-mail, no login is 
required.