Acu-Rite CNC 3500i User Manual
ACU-RITE 3500i
191
7.
2
C
a
n
n
e
d
C
y
c
le
s
Bottom Finish
Use Bottom Finish to remove bottom stock left by a previously
programmed pocket cycle.
programmed pocket cycle.
Bottom Finish must be programmed immediately after a compatible
pocket cycle that has left bottom stock. All of the bottom stock is
removed in one pass. Islands (G162) definitions apply to this cycle,
and will be avoided if active. Islands need to be re-defined after the
pocket cycle, before the Bottom Finish call.
pocket cycle that has left bottom stock. All of the bottom stock is
removed in one pass. Islands (G162) definitions apply to this cycle,
and will be avoided if active. Islands need to be re-defined after the
pocket cycle, before the Bottom Finish call.
G-code format: G133
Field
Code
Description
RampFeed
I
The feedrate at which the tool will "ramp"
into the pocket in all three axes. Default is
last programmed feedrate.
into the pocket in all three axes. Default is
last programmed feedrate.
FinFeed
K
Feedrate used during finish passes. Default
is last programmed feedrate.
is last programmed feedrate.
FinishDir
Q
Select Cw or Ccw.