DYMO Rhino 5200 User Manual

12

3. Enter or select the breaker length and 

press .
Select the length that applies to the smallest size 
breaker in the panel. You can then use breaker 
multipliers to increase the size of any individual 
breakers that are larger. The default breaker size 
is 1.0” (25.4 mm).

4. Enter or select the number of breakers and 

press .

5. Select the breaker multiplier for each breaker 

and press 

.

Each breaker is separated by a solid black line on 
the display.

6. Enter the text for each breaker in the label. 

Use the up or down arrow key to move from 
breaker to breaker.

To adjust the breaker multipliers after a label has 
been created, see Using Breaker Multipliers on 
page 12.
To create data for the breakers automatically, see 
Creating a Series of Labels on page 16.
To print separator lines between the breakers, see 
Printing Separator Lines Between Cells on 
page 14.

Breaker multipliers allow you to adjust the size of 
individual breakers within an Electrical Panel label. 
To adjust the size of an individual breaker
1. Create an Electrical Panel label as described in 

Creating Electrical Panel Labels.

2. Press 

3. Select Current label config. and press 

.

4. Select Breaker multipliers and press 

.

5. Use the up and down arrow keys to select the 

breaker number to adjust and press =.

6. Select the multiplier for that breaker. 
7. Press 

 and then Done (OK) to 

return to the label.

By default, empty breakers at the end of an 
Electrical Panel label are not printed. You can 
choose whether or not to print empty breakers at 
the end of a label.

To print empty breakers
1. Press .
2. Select Print empty breakers and 

press .

3. Select On and press 

.

4. Select Done (OK) to return to the label.
Any empty breakers at the end of an Electrical 
Panel label will now be printed.

You can create two types of block labels: Terminal 
Block and 110-Block labels.

A Terminal Block label is 
very similar to a Patch 
Panel label; however, the 
text is printed vertically 
for each block. 
To create a terminal 
block label
1. Press .
2. Select Terminal block 

and press 

.

3. Enter or select the number of blocks and 

press .

4. Enter or select the block width and 

press . 
The default block width is 0.5” (17.5 mm).
Each block is separated by a solid black line on 
the display.

5. Enter the text for each terminal. 

Use the up or down arrow key to move from 
terminal to terminal.

To create data for the terminal blocks automatically, 
see Creating a Series of Labels on page 16.
To print separator lines between the ports, see 
Printing Separator Lines Between Cells on 
page 14.