DYMO Rhino 5200 User Manual

5

With your new RHINO label printer, you can create a 
wide variety of high-quality, self-adhesive labels. 
You can choose to print your labels in many 
different sizes and styles. The printer uses  RHINO 
Industrial label cartridges  in widths of 1/4” (6 mm), 
3/8” (9 mm), 1/2” (12 mm), or 3/4” (19 mm). RHINO 
label cartridges are also available in a wide range of 
materials, such as flexible nylon, permanent 
polyester, vinyl, non-adhesive tag, and heat shrink 
tubes.
Visit www.dymo.com for information on the full 
line of labels and accessories for your printer.

Visit www.dymo.com/register to register your 
label printer online. During the registration process, 
you will need the serial number, which is located 
inside the battery compartment.

Follow the instructions in this section to start using 
your printer for the first time.

The printer can be powered with batteries or AC 
power. A rechargeable Lithium-ion battery pack 
and AC power adapter are included with some 
models. Visit www.dymo.com for information on 
obtaining an optional rechargeable battery pack.

For optimal power, use the optional 

rechargeable Lithium-ion battery pack for portable 
use when not connected to the AC power adapter. 
To save power, the printer will automatically turn 
off after five minutes of inactivity. 

The printer can operate using six AA alkaline 
batteries.

To insert the batteries
1. Press the thumb latch on the back of the 

printer to remove the battery compartment 
cover. See Figure 2.

2. Insert the batteries into the battery 

3. Replace the battery compartment cover.

Remove the batteries if the printer will not be 

used for a long period of time.

The printer uses a 110V-240V power adapter. 
Connecting the power adapter with the battery 
pack inserted recharges the battery pack.
To connect the power adapter
1. Plug the power adapter into the power 

2. Plug the other end of the power adapter into a 

power outlet.

Press thumb 
latch to open