DYMO Rhino 5200 User Manual

7

The first time you turn on the power, you are 
prompted to select your desired language. By 
default, the language is set to English. 
Several language-related features on the printer 
are determined by the language setting, such as 
special characters, menu text, and so on. You can 
change the language selection at any time from the 
Settings menu.
To select a language
1. Press .
2. Select Language and press 

.

3. Select the language.
4. Press 

 and then select Done (OK).

The first time you turn on the power, you are 
prompted to select your desired units of measure. 
You can choose to work in inches or millimeters. 
You can change the units of measure at any time 
from the Settings menu.
To select the units of measure
1. Press .
2. Select Units and press 

.

3. Select inch or mm.
4. Press 

 and then select Done (OK).

Become familiar with the location of the feature 
and function keys on your printer. See Figure 1 on 
page 4. The following sections describe each 
feature in detail. 

The 

 button turns the power on and off. If no 

keys are pressed after five minutes, the power is 
turned off automatically. 
When the printer is turned off, the current label file 
and its settings are remembered for the next time 
the printer is turned on. If the batteries and power 
adapter are disconnected at the same time, some 
of the settings are remembered; however, the 
current label file is lost and you will need to reset 
the label width when you reconnect the power and 
turn on the printer.

The LCD display includes a caption bar across the 
top showing the current label type, and feature 
indicators on the right side showing which features 
are currently selected. See Figure 6.

When the text you have entered will not fit on the 
label as currently defined, the portion of the text 
that will not fit is shaded. If you attempt to print the 
label containing text that will not fit, the excess text 
will not be printed.

In low light conditions, you can turn on the 
backlight to make it easier to see the display. To 
save power, the back light will turn off 
automatically after 15 seconds of inactivity. 
Pressing any key will turn the backlight back on 
again. The backlight key acts as a toggle to turn the 
light on and off.
To toggle backlighting on and off

Š

Press .

In addition to backlighting, you can adjust 
the display contrast to help in different 
lighting conditions.
To adjust the display contrast
1. Press . 
2. Select LCD contrast and press 

.

3. Use the arrow keys to select a value between 

0 (lighter) and 8 (darker). The contrast changes 
as you select the different settings.

4. Press 

, and then select Done (OK).

The Caption bar at the top of the display shows the 
current label type and for some label types, 
additional information about the label, such as size 
or barcode type.

Feature indicators

Caption bar

Battery level 
indicator