OKI 4580 User Manual

Your machine can hold up to 100 sheets of stan-
dard-weight (20 lb.) paper. For best results, use
paper specially made for laser printers or photo-
copiers. Available sizes are A4, letter size and legal
size.

Your machine automatically reduces the vertical
length of the page images it receives to fit on the
paper loaded in your machine (down to 75% of the
original length). For example, if you are sent a
document created originally on legal-size paper,
your machine can reduce the received pages to fit
on A4 or letter-size paper.

Your machine is set at the factory to use
letter size paper. If you intend to use a
different paper size, change the PAPER
SIZE user function setting to match your
new paper size. See the Programming
chapter for instructions.

1 Adjust the paper guides to the width of your

paper.

Fig05_16.eps

Adjust the paper guide on the right side
to the mark of the width of your paper.
After completing paper setting (Item 3),
the paper guide on the left side should
be aligned to the paper’s width.

2 Remove the paper from its wrapper (up to 100

sheets). Note the “print side” notice printed on
the label. Fan the paper.

3 Insert the paper into the paper tray, print side

down.

Fig05_17.eps

 

Tip: Be sure to insert at least 11 sheets of

paper into the paper tray. Any less than
that brings up the “No-feed” response.