OKI 4580 User Manual

Many of your machine’s features and functions
have settings which can be changed to customize
the operations of your machine. Because each
country has different regulations, you may not be
able to access all of the settings listed in this
chapter. If you have trouble changing a setting,
contact your dealer for assistance.

Follow these instructions to obtain a configuration
report showing your machine’s current settings.

Fig09_01.eps

5:CONFIGURATION
YES(

    

)  NO(    /1-6)

+

+

JKL

5

REPORT 

PRINT

6

SELECT

FUNCTION

1 Press the SELECT FUNCTION key.

2 Press the 6/REPORT PRINT One-Touch key.

The display shows 1:ACTIVITY REPORT.

3 Using the numeric keypad, press 5.

The display shows 5:CONFIGURATION.

4 Press 

YES

 . The report prints.

User function settings allow you to customize the
general operation of your machine. Refer to the
User Function Settings List to determine which
settings you may need to change, then refer to
Changing Your User Function Settings to make the
change.

01 MCF (SINGLE-LOC.): This function auto-
matically prints a Message Confirmation Report
after each single-location transmission or polling
transmission. Available settings are on and off.

02 MCF (MULTI-LOC.): This function automati-
cally prints a Message Confirmation Report after
each multiple-location transmission. Available
settings are on and off.

03 ERR REPORT (MCF): This function auto-
matically prints a Message Confirmation Report
each time an error occurs during a transmission
or polling transmission operation. Available
settings are on and off.

04 IMAGE IN MCF: When a message confirma-
tion is printed, this function adds a portion of the
first page your machine transmitted. This is
printed at the bottom of the message confirma-
tion report. Available settings are part., whole,
and off.

When part. (partial) is selected, the common
header of the first page is added in original size.

When whole is selected, the first page is added
in (vertically) reduced size.