OKI 4580 User Manual
56
OKIFAX 4580 Users Guide
Changing Your User Function Settings
Fig09_01a.eps
1 Press the SELECT FUNCTION key.
2 Press the 9/USER PROG. One-Touch key. The
display shows 1:FUNC. PROGRAMMING.
3 Press
YES
. The display shows FUNCTION
NO. [ ].
4 Using the numeric keypad, enter the 2-digit
number of the function you want to change.
This display shows the name of the selected
function.
This display shows the name of the selected
function.
5 Repeatedly press
NO
until the setting you
want appears in the display.
Tip:
If you are changing your machine’s TX
MODE DEFAULT settings, the new
settings appear on the LEDs above the
Transmit Resolution/
MODE DEFAULT settings, the new
settings appear on the LEDs above the
Transmit Resolution/
YES
and the
Type of Original/
NO
6 Press
YES
to confirm your selection. The
name of the next function setting appears in the
display.
display.
7 Press the SELECT FUNCTION key to finish.
Setting Your Machine’s Distinctive Ring
To use Distinctive Ring:
• You must have your local telephone carrier’s
Distinctive Ring service.
• Your unit must be in FAX or PC answer mode,
and the PBX dial parameter must be set to off.
Other modes—TEL, TEL/FAX, or TAD—override
Distinctive Ring.
Other modes—TEL, TEL/FAX, or TAD—override
Distinctive Ring.
• You must have a genuine OKI optional handset
connected to your unit. This feature may not work
properly if you have a telephone other than a
genuine OKI handset (an option) connected to
your machine.
properly if you have a telephone other than a
genuine OKI handset (an option) connected to
your machine.
Fig09_01a.eps
1 Press the SELECT FUNCTION key.
2 Press the 9/USER PROG. One-Touch key. The
display shows 1:FUNC. PROGRAMMING.
3 Press
YES
. The display shows FUNCTION
NO. [ ].
4 Using the numeric keypad, enter 12. The
display shows DISTINCTIVE RING, [OFF].
5 Press
NO
. The display changes to DIS-
TINCTIVE RING, [SET].
6 Press
YES
. The display changes to
SETUP FAX RING, CALL FAX NUMBER
NOW.
NOW.
7 Using a separate telephone line, immediately
dial the number assigned to the fax machine
(you must do this within 90 seconds). When
your machine begins to ring, it automatically
detects and remembers its assigned ring
pattern. When it has finished programming its
ring pattern, the display shows RESULT=OK.
(you must do this within 90 seconds). When
your machine begins to ring, it automatically
detects and remembers its assigned ring
pattern. When it has finished programming its
ring pattern, the display shows RESULT=OK.
Tip:
Occasionally, your machine may not be
able to detect its ring pattern on the first
try. If this happens, the display shows
RESULT=NG. Follow the instructions
again from Step 6.
able to detect its ring pattern on the first
try. If this happens, the display shows
RESULT=NG. Follow the instructions
again from Step 6.
8 Press
YES
to confirm your selection.
9 Press the SELECT FUNCTION key to finish.