OKI 4580 User Manual
Programming
59
Memory Password Programming (Register)
Fig09_02.eps
1 Press the SELECT FUNCTION key.
2 Press the 9/USER PROG. One-Touch key.
The display shows 1: FUNC. PROGRAM-
MING.
MING.
3 On the numeric keypad, press 7. The display
shows 7: MEM PASSWORD PRG.
4 Press
YES
. The display shows PRG
PASSWORD [ ].
5 On the numeric keypad, enter a four-digit
password.
6 Press
YES
to register your Memory Pass-
word.
Tip:
Make sure to keep a record of your
registered password so as not to forget
it.
registered password so as not to forget
it.
Memory Password Programming (Delete)
Fig09_02.eps
1 Press the SELECT FUNCTION key.
2 Press the 9/USER PROG. One-Touch key.
The display shows 1: FUNC. PROGRAM-
MING.
MING.
3 On the numeric keypad, press 7. The display
shows 7: MEM PASSWORD PRG.
4 Press
YES
. The display shows PRG.
PASSWORD [xxxx].
5 Enter in a one-digit space. The display asks
DELETE PASSWORD?
6 Press
YES
to delete your Memory Recep-
tion mode password.
Dial Parameter Settings
These functions allow you to control the way your
machine dials telephone numbers. Refer to the Dial
Parameter Settings List to determine which settings
you may need to change, then refer to Changing
Your Dial Parameter Settings to make the change.
machine dials telephone numbers. Refer to the Dial
Parameter Settings List to determine which settings
you may need to change, then refer to Changing
Your Dial Parameter Settings to make the change.
Tip:
Some settings are not available in some
countries. If you have trouble accessing
a dial parameter setting listed here,
contact your dealer for assistance.
countries. If you have trouble accessing
a dial parameter setting listed here,
contact your dealer for assistance.
Dial Parameter Settings List
REDIAL TRIES: This function controls how
many times your machine automatically redials a
number which is busy or which does not answer.
Available settings are from 0 to 10 tries.
many times your machine automatically redials a
number which is busy or which does not answer.
Available settings are from 0 to 10 tries.
REDIAL INTERVAL: Controls how long your
machine waits between each automatic redial
attempt. Available settings are from 1 to 6
minutes.
machine waits between each automatic redial
attempt. Available settings are from 1 to 6
minutes.
DIAL TONE DETECT: This function allows your
machine to wait for and detect a dial tone before
proceeding with dialing. Available settings are
on and off.
machine to wait for and detect a dial tone before
proceeding with dialing. Available settings are
on and off.
BUSY TONE DETECT: This function allows
your machine to detect a busy tone when
sending a fax. Available settings are on and off.
your machine to detect a busy tone when
sending a fax. Available settings are on and off.
MF(TONE)/DP(PULSE): This function controls
what method your machine uses for dialing. Two
dialing methods are in common use. DP, or dial
pulse dialing, uses monotone pulses to dial a
number (like a rotary telephone). MF, or multi-
frequency dialing (touch-tone), uses different
tones to dial a number. Available settings are
MF and DP.
what method your machine uses for dialing. Two
dialing methods are in common use. DP, or dial
pulse dialing, uses monotone pulses to dial a
number (like a rotary telephone). MF, or multi-
frequency dialing (touch-tone), uses different
tones to dial a number. Available settings are
MF and DP.
PULSE DIAL RATE: If your machine is set to
pulse dialing, this function controls how quickly
your machine sends out dialing pulses (the dial
pulse rate varies in different countries). Avail-
able settings are 10 pps, 16 pps and 20 pps.
pulse dialing, this function controls how quickly
your machine sends out dialing pulses (the dial
pulse rate varies in different countries). Avail-
able settings are 10 pps, 16 pps and 20 pps.
PULSE MAKE RATIO: Available settings are
33%, 39% and 40%.
33%, 39% and 40%.
PULSE DIAL TYPE: If your machine is set to
pulse dialing, this function controls the type of
pulse dialing used (different types of pulse
dialing are used in different countries). Available
settings are N, 10-N and N+1.
pulse dialing, this function controls the type of
pulse dialing used (different types of pulse
dialing are used in different countries). Available
settings are N, 10-N and N+1.