OKI 5400 User Manual

48

User’s Guide

The available settings are limit reception only (RX), limit both 
transmission and reception (T/R), and no limitation on transmission or 
reception (OFF). To use the closed network function, follow the 
instructions below.

1.

Press the Select Function key.

2.

Press the 9/User Program One Touch key. The display shows 
1:FUNC. PROGRAMMING.

3.

Press the YES key. The display shows FUNCTION NO. [

 ].

4.

Using the numeric keypad, enter 08. The display shows 
08:CLOSED NETWORK, and the current setting of this function.

5.

Press the NO key until the setting you want appears in the display.

6.

Press the YES key to confirm the new setting.

7.

Press the Select Function key to finish. 

If power is interrupted to your fax machine, the following problems will 
occur: 

•

Any messages your fax machine has scanned into memory, but not 
yet transmitted, are lost.

•

Any messages your fax machine has received into memory, but not 
yet printed, are lost.

•

If you have loaded documents onto the document feeder of your fax 
machine, any dialling or transmission settings are lost.

Your fax machine prints a power outage report to inform you of a power 
failure. Use this report to determine which received messages you may 
have lost and which transmissions you may have to resend. Refer to 
Reports for more information. 

Your fax machine can also be used to make copies. You can make up to 50 
copies at one time. Your fax machine automatically makes all copies in 
FINE mode.  EX.FINE and PHOTO mode can be selected manually by 
pressing the YES key.

1.

Load your documents.