Brother 1030e User Manual

If your document is very light or very dark, you might want to set the contrast accordingly. Use 
LIGHT to send a light document. Use DARK to send a dark document. After sending the document 
the contrast setting is set to AUTO (suitable for most documents) automatically.

Insert the document face down in the ADF.

Press Menu/Set, 3, 3.

Use 

 or 

 to select AUTO, LIGHT, or DARK.

When the screen displays your selection, press 
Menu/Set. The screen displays:

Press 2 if you 

have

 finished choosing settings, and go to 

Step 6—OR––Press 1 if you want to select additional 
settings. The display returns to Setup Send menu.

Enter a fax number and press Fax Start to send a fax.

When you have a document in the feeder, you can use the Resolution key. Press Resolution 
continuously until you see your selection on the screen. 

If you want to set a different resolution for each 

page,

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the 
fax.

Insert the document face down in the ADF.

Pick up the handset and listen for a dial tone—OR—Press Speaker phone (for FAX-1030e 
only).

When you hear the fax tone, press Fax Start. If you are using the handset, hang up.

suitable for most typed documents.

good for small print; transmits a little slower than standard resolution.

good for small print or artwork; transmits slower than fine resolution.

use when document has varying shades of grey; slow transmission time. 

NEXT

ACCEPTED

1.YES 2.NO