Brother 1030e User Manual

As soon as the paper tray becomes empty during fax reception, the screen will display 
CHECK PAPER; please put some paper in the paper tray.

The current fax reception will continue, with the remaining page(s) being stored in memory, subject 
to available memory. Subsequent incoming faxes will also be stored into memory until the memory 
is full, following which no further incoming fax calls will be automatically answered; all data will 
be printed as soon as fresh paper is put in the paper tray.

The current fax reception will continue, with the remaining page(s) being stored in memory, subject 
to available memory. Subsequent incoming fax calls will not be automatically answered until fresh 
paper is put in the paper tray. The last fax received will be printed as soon as fresh paper is put in the 
paper tray.

Press Menu/Set, 2, 6. The screen displays

Use 

 or 

 to select ON or OFF, and press 

Menu/Set when the screen displays your selection.

Press Stop/Exit.

If you have fax storage ON for remote retrieval, you can still print a fax from the machine’s memory 
when you are at your machine. (See Setting Fax Storage, page 55.)

Press Menu/Set, 8, 4.

Press Fax Start.

Press Stop/Exit.

■ When you use Auto Reduction to reduce incoming documents to fit on one page 

of recording paper, you can do so only as long as the original document is not 
longer than 35 cm. If the original is longer than 35 cm, the data will not be 
reduced and will carry over to print on a second page.

■ When you use Auto Reduction and you receive an incoming document that is 

smaller than your recording paper, no reduction will take place, and you will get 
the same size recorded as the original.

6.MEM.RECEIVE