Panasonic KX-FL613HK User Manual

Page of 70
6. Copy
37
6 Copy
Copying
6.1 Making a copy
1
Adjust the width of the document guides (
1) 
to fit the actual size of the document.
2
Insert the document (up to 20 pages) FACE 
DOWN until a single beep is heard and the 
unit grasps the document.
L
If the document guides are not adjusted 
to fit the document, re-adjust them.
3
If necessary, press {RESOLUTION
repeatedly to select the desired resolution.
4
Press {COPY START}.
L
If necessary, enter the number of copies 
(up to 99).
5
Press {COPY START}, or wait for 20 
seconds.
L
The unit will start copying.
Note:
L
Any document which can be sent as a fax can 
also be copied (page 28).
To select the resolution
Select the desired resolution according to the 
type of document.
FINE”: For printed or typewritten 
documents with small print.
SUPER FINE”: For documents with very 
small print.
PHOTO”: For documents containing 
photographs, shaded drawings, etc.
PHOTO WITH TEXT”: For documents 
containing photographs and text.
L
If you select 
STANDARD”, copying will be 
done using 
FINE” mode.
To stop copying
Press {STOP}.
6.1.1 More copying features
To enlarge a document
1. Insert the document, then press {COPY 
START}.
2. Press {A} repeatedly to select from 
105%” 
to 
200%” by changing the enlargement rate 
5% at a time.
3. Press {COPY START}.
L
The unit will only enlarge the centre of the 
upper part of the document. To make an 
enlarged copy of the bottom of the 
document, turn the document around, 
and then make a copy.
Example: 150% enlarged copy
To reduce a document
1. Insert the document, then press {COPY 
START}.
2. Press {B} repeatedly to select from 
50%” to 
95%” by changing the reduction rate 5% at a 
time.
3. Press {COPY START}.
Example: 70% reduced copy
{
RESOLUTION}
{
COLLATE}
{
COPY START}
{
STOP}
{A}{B}
1
Original document
Enlarged copy
Original document
Reduced copy
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
FL613HK-PFQX2156ZA-en.book  Page 37  Friday, January 7, 2005  5:54 PM