Panasonic KX-FL613HK User Manual

±]

If you wish to use an extension telephone to 
receive faxes, activate this feature and program 
the activation code.

1. Press {MENU}.

2. Press {#}, then {4}{1}.

3. Press {A} or {B} repeatedly to select “

ON”.

4. Press {SET}.

5. Enter your code from 2 to 4 digits, using 0–9, 

{*}

 and {#}.

L

The default code is “;;;

9”.

L

Do not enter “0000”.

6. Press {SET}.

7. Press {MENU}.

±]

To alert you with a beeping sound when a 
received fax document is stored into memory 
due to some existing problem.
The slow beeps will continue until you clear the 
printing problem and make sure the unit is 
supplied with enough paper to print the stored 
document.
“

ON” (default): You will be alerted to a reception 

problem by a beeping sound.
“

OFF”: Deactivates this feature.

±]

To receive a fax automatically when you answer 
a call and hear a fax calling tone (slow beep).
“

ON” (default): You do not have to press {FAX 

START} for fax reception.
“

OFF”: You have to press {FAX START} for fax 

reception.

±]

To answer a call with an extension telephone in 
TEL/FAX mode (page 33), activate this feature 
and program the code.

1. Press {MENU}.

2. Press {#}, then {4}{9}.

3. Press {A} or {B} repeatedly to select “

ON”.

4. Press {SET}.

5. Enter your code (2–4 digits) using the dial 

keys 0–9 and {*}.

L

The default code is “;

0”.

6. Press {SET}.

7. Press {MENU}.

±]

To send or copy a document with faint or dark 
writing, set this feature before starting 
transmission or copying.
“

NORMAL” (default): Used for normal writing.

LIGHT”: Used for faint writing.

DARKER”: Used for dark writing.

±]

This feature is available when the 
transmitting/receiving fax machines are ECM 
compatible.
“

ON” (default): To send a fax even if there is 

static interference on the telephone line.
“

OFF”: Deactivates this feature.

±]

If you often have trouble when sending faxes, 
this feature allows you to hear connecting tones: 
fax tone, ring back tone and busy tone. You can 
use these tones to confirm the status of the other 
party’s machine.
“

ON” (default): You will hear connecting tones.

OFF”: Deactivates this feature.

L

If the ring back tone continues, the other 
party’s machine may not be a fax machine or 
may have run out of paper. Check with the 
other party.

L

The connecting tone volume cannot be 
adjusted.

±]

FAX ONLY” (default): Fax only mode (page 33)

TEL/FAX”: Telephone/Fax mode (page 33)

FL613HK-PFQX2156ZA-en.book  Page 42  Friday, January 7, 2005  5:54 PM