Panasonic KX-FL613HK User Manual
8. Help
45
8 Help
Error Messages
8.1 Error messages –
Reports
Reports
If a problem occurs during fax transmission or
reception, one of the following messages will be
printed on the sending and journal reports (page
28).
reception, one of the following messages will be
printed on the sending and journal reports (page
28).
COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)
(Code: 40-42, 46-72, FF)
L
A transmission or reception error occurred.
Try again or check with the other party.
Try again or check with the other party.
COMMUNICATION ERROR
(Code: 43, 44)
(Code: 43, 44)
L
A line problem occurred. Connect the
telephone line cord to a different jack and try
again.
telephone line cord to a different jack and try
again.
L
An overseas transmission error occurred. Try
using the overseas mode (feature #23, page
41).
using the overseas mode (feature #23, page
41).
DOCUMENT JAMMED
L
The document is jammed. Remove the
jammed document (page 57).
jammed document (page 57).
ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)
(Code: 54, 59, 70)
L
A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.
because of a problem with the other party’s
fax machine. Check with the other party.
MEMORY FULL
L
The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 13)
or clear the jammed paper (page 54).
due to a lack of recording paper or a
recording paper jam. Install paper (page 13)
or clear the jammed paper (page 54).
NO DOCUMENT
L
The document was not fed into the unit
properly. Re-insert it and try again.
properly. Re-insert it and try again.
OTHER FAX NOT RESPONDING
L
The other party’s fax machine is busy or has
run out of recording paper. Try again.
run out of recording paper. Try again.
L
The other party’s fax machine rings too many
times. Send the fax manually (page 27).
times. Send the fax manually (page 27).
L
The other party’s machine is not a fax
machine. Check with the other party.
machine. Check with the other party.
L
The number you dialled is not in service.
PRESSED THE STOP KEY
L {
STOP} was pressed and fax communication
was cancelled.
THE COVER WAS OPENED
L
The front cover was opened. Close it and try
again.
again.
OK
L
Fax transmission or reception was
successful.
successful.
8.2 Error messages –
Display
Display
If the unit detects a problem, one or more of the
following messages will appear on the display.
—————————————————————
following messages will appear on the display.
—————————————————————
CALL SERVICE
L
There is something wrong with the unit.
Contact our service personnel.
Contact our service personnel.
—————————————————————
CHANGE DRUM
b
CHANGE SUPPLIES
L
There is something wrong with the drum unit.
Replace the drum unit and the toner cartridge
(page 52).
Replace the drum unit and the toner cartridge
(page 52).
—————————————————————
CHECK DOCUMENT
L
The document was not fed into the unit
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 58) and try
again.
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 58) and try
again.
—————————————————————
CHECK DRUM
L
The drum unit is not inserted properly. Re-
insert it correctly (page 10).
insert it correctly (page 10).
—————————————————————
CHECK MEMORY
L
The memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.
parameters, etc.) has been erased. Re-
program.
—————————————————————
COVER OPEN
L
The front cover is open. Close it.
—————————————————————
DIRECTORY FULL
FL613HK-PFQX2156ZA-en.book Page 45 Friday, January 7, 2005 5:54 PM