Panasonic KX-FL613HK User Manual
Important Information
4
Laser radiation
L
The printer of this unit utilises a laser. Use of
controls or adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
controls or adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
Fuser unit
L
The fuser unit gets hot. Do not touch it.
L
During or immediately after printing, the area
near the recording paper exit (
near the recording paper exit (
1) also gets
warm. This is normal.
Toner cartridge
L
Be careful of the following when you handle
the toner cartridge:
–
the toner cartridge:
–
Do not leave the toner cartridge out of the
protection bag for a long time. It will
decrease the toner life.
protection bag for a long time. It will
decrease the toner life.
–
If you ingest any toner, drink several
glasses of water to dilute your stomach
contents, and seek immediate medical
treatment.
glasses of water to dilute your stomach
contents, and seek immediate medical
treatment.
–
If any toner comes into contact with your
eyes, flush them thoroughly with water,
and seek medical treatment.
eyes, flush them thoroughly with water,
and seek medical treatment.
–
If any toner comes into contact with your
skin, wash the area thoroughly with soap
and water.
skin, wash the area thoroughly with soap
and water.
–
If you inhale any toner, move to an area
with fresh air and consult local medical
personnel.
with fresh air and consult local medical
personnel.
Drum unit
L
Read the instructions on page 10 before you
begin installation of the drum unit. After you
begin installation of the drum unit. After you
have read them, open the drum unit
protection bag. The drum unit contains a
photosensitive drum. Exposing it to light may
damage the drum. Once you have opened
the protection bag:
–
protection bag. The drum unit contains a
photosensitive drum. Exposing it to light may
damage the drum. Once you have opened
the protection bag:
–
Do not expose the drum unit to light for
more than 5 minutes.
more than 5 minutes.
–
Do not touch or scratch the green drum
surface.
surface.
–
Do not place the drum unit near dust or
dirt, or in a high humidity area.
dirt, or in a high humidity area.
–
Do not expose the drum unit to direct
sunlight.
sunlight.
WARNING:
L
To prevent the risk of fire or electrical shock,
do not expose this product to rain or any type
of moisture.
do not expose this product to rain or any type
of moisture.
For best performance
Toner cartridge and drum unit
L
In the printing process, heat is used to fuse
toner onto the page. As a result, it is normal
for the machine to produce an odour during
and shortly after printing. Be sure to use this
unit in an area with proper ventilation.
toner onto the page. As a result, it is normal
for the machine to produce an odour during
and shortly after printing. Be sure to use this
unit in an area with proper ventilation.
L
To extend the life of the drum unit, the unit
should never be turned OFF immediately
after printing. Leave the power turned ON for
a minimum of 30 minutes after printing.
should never be turned OFF immediately
after printing. Leave the power turned ON for
a minimum of 30 minutes after printing.
L
Do not cover slots or openings on the unit.
Inspect the air circulation vents regularly and
remove any dust build-up with a vacuum
cleaner (
Inspect the air circulation vents regularly and
remove any dust build-up with a vacuum
cleaner (
2).
L
When replacing the toner cartridge or drum
unit, do not allow dust, water, or liquids to
come in contact with the drum. This may
affect print quality.
unit, do not allow dust, water, or liquids to
come in contact with the drum. This may
affect print quality.
Environment
L
Keep the unit away from electrical noise
generating devices, such as fluorescent
lamps and motors.
generating devices, such as fluorescent
lamps and motors.
L
The unit should be kept free from dust, high
temperature and vibration.
temperature and vibration.
L
The unit should not be exposed to direct
sunlight.
sunlight.
L
Do not place heavy objects on top of the unit.
L
When you leave the unit unused for a long
period of time, unplug this unit from power
outlet.
period of time, unplug this unit from power
outlet.
L
The unit should be kept away from heat
sources such as heaters, kitchen stoves, etc.
It should not be placed in rooms where the
temperature is less than 10 °C or greater
sources such as heaters, kitchen stoves, etc.
It should not be placed in rooms where the
temperature is less than 10 °C or greater
Fuser unit
1
2
2
FL613HK-PFQX2156ZA-en.book Page 4 Friday, January 7, 2005 5:54 PM