Panasonic KX-FL421 User Manual
4. Fax
33
4.4.2 Adding a new item into the broadcast
memory
memory
After initial programming, you can add new items (up to
a combined total of 20).
a combined total of 20).
1
Press {>}.
L
Confirm that there are no documents in the
document entrance.
document entrance.
2
Press {A} or {B} repeatedly to display the desired
broadcast memory (“
broadcast memory (“
<BROADCAST1>”,
“
<BROADCAST2>” or “<MANUAL BROAD>”).
3
Press {Menu}.
4
Press {*}.
5
Press {A} or {B} repeatedly to display the desired
item you want to add.
item you want to add.
6
Press {Set}.
L
To add other items, repeat steps 5 and 6 (up to
20 items).
20 items).
7
Press {Stop} to exit.
Note:
L
When adding new items to the MANUAL
BROADCAST memory, you can only select stored
items.
BROADCAST memory, you can only select stored
items.
4.4.3 Erasing a stored item from the
broadcast memory
broadcast memory
1
Press {>}.
L
Confirm that there are no documents in the
document entrance.
document entrance.
2
Press {A} or {B} repeatedly to display the desired
broadcast memory (“
broadcast memory (“
<BROADCAST1>”,
“
<BROADCAST2>” or “<MANUAL BROAD>”).
3
Press {Menu}.
4
Press {#}.
5
Press {A} or {B} repeatedly to display the desired
item you want to erase.
item you want to erase.
L
To cancel erasing, press {Stop}.
6
Press {Set}.
7
Press {Set}.
L
To erase other items, repeat steps 5 to 7.
8
Press {Stop} to exit.
4.4.4 Sending the same document to pre-
programmed parties
programmed parties
1
Insert the document FACE DOWN.
2
If necessary, press {A} or {B} repeatedly to select
the desired resolution (page 30).
the desired resolution (page 30).
3
Press the desired {Broadcast} (1-2) or {Manual
Broad}.
Broad}.
L
After transmission, the unit will automatically
print a report (broadcast sending report).
print a report (broadcast sending report).
Note:
L
If you select “
FINE”, “SUPER FINE”, “PHOTO” or
“
MIXED” resolution, the number of pages that the
unit can send will decrease.
L
If the document exceeds the memory capacity,
sending will be canceled.
sending will be canceled.
L
If a party is busy or does not answer, it will be skipped
and redialed later 1 time.
and redialed later 1 time.
To cancel broadcast transmission
1. Press {Stop} repeatedly until “
SEND CANCELED?”
is displayed.
2. Press {Set}.
FL421-PNQX3022ZA-OI-en.book Page 33 Thursday, July 29, 2010 9:35 AM