Panasonic DX-600 User Manual
Setting the Internet Parameters
50
Depending on how your machine will be configured to communicate on the LAN, the appropriate
parameters listed in the table below must be stored first. (See pages 16 to 20)
parameters listed in the table below must be stored first. (See pages 16 to 20)
Setting the User Parameters for the LAN Interface
Parameter
Comments
1
DATE & TIME
Current Date and Time.
2
TIME ZONE
The Time Zone is required as part of the Email header information when sending
Internet faxes.
Internet faxes.
3
LOGO
Up to 25 characters & digits.
4
CHARACTER ID
Up to 16 characters & digits.
5
ID NO.
Your Fax Telephone Number. (Up to 20 digits)
6
(MAC ADDRESS)
Hardware Address hard-coded into your machine. (If required, can be obtained from the
Fax Parameter List printout, by pressing [FUNCTION] [6] [4] [SET])
Fax Parameter List printout, by pressing [FUNCTION] [6] [4] [SET])
7
IP ADDRESS
IP Address assigned to your machine by the Network Administrator or the DHCP Server.
8
SUBNET MASK
Subnet Mask assigned by the Network Administrator or the DHCP Server.
9
DEFAULT GATEWAY IP
ADDR
Default Gateway IP Address assigned by the Network Administrator or the DHCP
Server.
10 PRIMARY DNS SERVER
IP ADDRESS
IP Address of the primary DNS Server. If the DNS Server is not available, change the
setting of the Fax Parameter No. 161 (DNS SERVER) to "Invalid", then enter the IP
Address instead.
11 SECONDARY DNS
SERVER IP ADDRESS
IP Address of the secondary DNS Server.
12 EMAIL ADDRESS
The Email Address assigned to your machine for sending and receiving. (Up to 60
characters)
13 SMTP SERVER NAME
The name of the SMTP Mail Server. (Up to 60 characters)
14 SMTP SERVER IP ADDR IP Address of the SMTP Mail Server.
15 SMTP AUTH NAME
15 SMTP AUTH NAME
User name required to login to the SMTP Server before it allow to send email messages.
(Up to 40 characters).
16 SMTP PASSWORD
Password assigned to your machine. (Up to 10 characters)
17 POP SERVER NAME
The name of the POP Mail Server. (Up to 60 characters).
18 POP SERVER IP ADDR
IP Address of the POP Mail Server.
19 POP USER NAME
User Name assigned to your machine. (Up to 40 characters)
20 POP PASSWORD
Password assigned to your machine. (Up to 10 characters)
21 LDAP SERVER NAME
The name of the LDAP Server. (Up to 60 characters) (Available for some countries only.)
22 LDAP LOG IN NAME
Login Name assigned to your machine. (Up to 40 characters) (Available for some
countries only.)
countries only.)
23 LDAP PASSWORD
Password assigned to your machine. (Up to 10 characters) (Available for some
countries only.)
countries only.)
24 LDAP SEARCH BASE
ID for starting the search in the directory on the LDAP server. (Up to 60 Characters)
(Available for some countries only.)
(Available for some countries only.)
25 HOST NAME
The Host Name assigned to your machine. (Up to 60 characters)
26 DEFAULT SUBJECT
The default information to be added to the Subject Line for all outgoing Email (up to 40
characters). To manually input this information before transmission, change the Fax
Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
27 DEFAULT DOMAIN
When the outgoing email address is incomplete by SMTP standards, the Frequently
Sent Domain specified here will be automatically added to the email address. This
feature is also useful as a shortcut when manually entering email addresses to a
feature is also useful as a shortcut when manually entering email addresses to a
frequently used Domain. (Up to 50 characters)
28 SELECTABLE DOMAINS
(01) ~ (10)
Enter up to 10 Domain Names that can be selected after the Domain "@" key is pressed
using the "\/ or /\" key during Manual email addressing. (Up to 30 characters)
29 REMOTE PASSWORD
This is a security password that allows Remote Programming of the Internet Parameters
and Auto Dialler or the retrieval of the Journal via an Email. (Up to 10 characters)
30 RELAY XMT PASSWORD A password that provides Network security for your Relay Station (used exclusively for
G3 relay purposes). (Up to 10 characters)
31 MANAGER’S EMAIL
ADDR
Department Manager’s Email Address for notification of all Internet relayed
transmissions for supervision and cost control purposes. (Up to 60 characters)
32 RELAY DOMAIN
(01) ~ (10)
Enter up to 10 Domain Name(s) that have been authorized to access your Internet Fax
for Relayed XMT Request. (Up to 30 characters)
Relay Domain, a.k.a. Domain Name in your machine.
Relay Domain, a.k.a. Domain Name in your machine.
33 COMMUNITY NAME
(01) ~ (02)
Community Name used for the Network Device Locator.
34 DEVICE NAME
Device Name used for the Network Device Locator.
35 DEVICE LOCATION
Device Location for the Network Device Locator.