Panasonic DX-600 User Manual

Loading Documents

1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge

placed into the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up
to 30 PAGES on the ADF at one time by staggering the documents as illustrated below. If you have
more than 30 pages, wait until transmission or storing in memory starts as pages feed through, place any
remaining pages on top of the last page in the feeder.

3. Adjust the Document Guides to center the document(s) on the ADF.

When you set a document on the ADF, the display message will change from date and time (standby) to
the following message. You can now change basic transmission settings, or begin the dialling procedure.

ENTER STATION(S)
THEN PRESS START 00%

NOTE

1. The multiple page sending limitation is as follows.

* Please note that although the size and thickness meets the specifications, you might not be
able to set 30 pages with some types of papers.

2 Transmitting documents longer than 356 mm requires user's assistance.
3 When transmitting documents longer than A4 size, please extend the sub-tray as shown

below.

How to Load Documents

Document Size

Document Thickness

Up to 20 pages

Up to 257mm X 364mm

0.06 mm to 0.12 mm

Up to 30 pages* A4 size

0.06 mm to 0.10 mm

CORRECT

INCORRECT

Document Guides

Document Sub Tray