Panasonic KX-FC238HK User Manual

Page of 106
12. Help
79
12 Help
12.1 Error messages – Reports
If a problem occurs during fax transmission or reception, one of the following messages will be printed on 
the sending and journal reports (page 40).
Message
Code
Cause & Solution
COMMUNICATION ERROR
40-42 
46-72 
FF
L
A transmission or reception error occurred. 
Try again or check with the other party.
43
44
L
A line problem occurred. Connect the 
telephone line cord to a different jack and try 
again.
L
An overseas transmission error occurred. Try 
using the overseas mode (feature #23 on 
page 60).
DOCUMENT JAMMED
-----
L
The document is jammed. Remove the 
jammed document (page 91).
ERROR-NOT YOUR UNIT
54
59
70
L
A transmission or reception error occurred 
because of a problem with the other party’s 
fax machine. Check with the other party.
JUNK FAX PROH. REJECT
-----
L
The fax was rejected by the junk fax prohibitor 
feature (page 49).
MEMORY FULL
-----
L
The memory is full of received documents 
due to a lack of recording paper, a lack of ink 
film or a recording paper jam. Install paper 
(page 17), install ink film (page 14) or clear 
the jammed paper (page 88).
NO DOCUMENT
-----
L
The document was not fed into the unit 
properly. Re-insert it and try again.
OTHER FAX NOT RESPONDING
-----
L
The other party’s fax machine is busy or has 
run out of recording paper. Try again.
L
The other party’s fax machine rings too many 
times. Send the fax manually (page 39).
L
The other party’s machine is not a fax 
machine. Check with the other party.
L
The number you dialled is not in service.
PRESSED THE STOP KEY
-----
L {
STOP} was pressed, and fax transmission or 
reception was cancelled.
OK
-----
L
Fax transmission or reception was 
successful.
FC238HK-PFQX2217ZA_en.book  Page 79  Wednesday, July 27, 2005  11:02 AM