Ricoh 2000 User Manual

Send Settings

108

I

When a password is required, enter the SID Code using the number keys,
and then press the {OK} key.

When a SID Code is not required, just press the {OK} key.
The standby screen returns.

J

Press the {Start} key.
If you use Immediate Transmission and the fax machine at the destination
does not support the SUB Code function, a message will appear on the display
to inform you of this. When this happens, press [Exit] to cancel the transmission.

❒ Make sure the number of digits in the SUB Code matches the specification

of the machine to which you are sending. For the maximum number of dig-
its for the SUB Code of this machine, see “Maximum Values”.

❒ You can store SUB Codes as well as names and fax numbers in the destination list.
❒ The SUB Code is printed on lists and reports.

Reference
p.186 “Maximum Values”
“Fax Features”, General Settings Guide
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gen-
eral Settings Guide

There are times when you may want to use an “SID” (Sender ID) when sending
confidential faxes with the SUB Code function. When you use a Transfer Box
that has a password, enter the SID Code as the password.

❒ You can store SID Codes as well as names and fax numbers in the destination

list.

❒ You can enter numbers, p, q, and spaces.
❒ The SID Code is printed on lists and reports.
❒ For the maximum number of digits for the SID Code, see “Maximum Values”.

Reference
p.186 “Maximum Values”
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gener-
al Settings Guide