Panasonic KX-FC962HK User Manual
9
1. Installation and Quick Start
1.6 Recording paper
A
Open the top cover by pressing the top cover
release button (
release button (
1).
B
Install the recording paper.
C
Insert the leading edge of the paper into the
opening above the thermal head (
opening above the thermal head (
1).
D
Pull the paper out of the unit.
L
Make sure that there is no slack in the
paper roll.
paper roll.
E
Close the top cover securely by pushing
down on both sides.
down on both sides.
F
Press {FAX/START} to cut the paper.
Correct
Incorrect
1
1
Note:
L
If the paper is secured with glue or tape,
cut approximately 15 cm from the
beginning of the roll before installing it.
cut approximately 15 cm from the
beginning of the roll before installing it.
L
When the power cord is connected, a
message is printed each time the top
cover is opened then closed. If the
recording paper is installed upside down,
the message will not be printed. Install the
paper correctly.
message is printed each time the top
cover is opened then closed. If the
recording paper is installed upside down,
the message will not be printed. Install the
paper correctly.
L
For accessory information, see page 5.
{
FAX/START}
FC962HK-PFQX2283ZA-en.book Page 9 Thursday, September 15, 2005 4:20 PM