Allied Telesis AT-MC606 User Manual

Overview

34

The AT-MC606 Subscriber unit is normally used as a stand-alone device, 
or can be used as a desktop device, or mounted to a wall.

To use the Subscriber unit on a desktop, perform the following procedure:

1. Remove all equipment from the package and store the packaging 

material in a safe place. 

2. Attach the four protective feet (provided) to each corner of the bottom 

of the unit, as illustrated in Figure 7.

Figure 7. Attaching Protective Feet

3. Position the AT-MC606 on the desktop.

4. Configure the right VDSL CONFIG switch (SCBR/PROV) to the SCBR 

position as shown in Figure 8.

Figure 8. Configuring AT-MC606 Ethernet Extender for Subscriber Mode

1932

VDSL EXTENDED ETHERNET

1936