Hughes DW6000 User Manual
Frequently asked questions
41
Frequently asked questions
6
1. What are the causes of interference in the operation of my
system?
The DIRECWAY
®
system operates in the Ku band. Other devices transmitting
in this band, such as radar detectors, can interfere with the system. Rain or snow
can interfere for the signal for brief periods. Also, snow or ice buildup on the
antenna may interfere with the signal.
can interfere for the signal for brief periods. Also, snow or ice buildup on the
antenna may interfere with the signal.
2. What is Automatic Cross Polarization (ACP)?
The ACP feature provides transmit satellite dish pointing information to your
installer and automatic satellite dish revalidation. This ensures your satellite
dish remains aligned.
installer and automatic satellite dish revalidation. This ensures your satellite
dish remains aligned.
Satellite systems with transmit capability — the ability to send data directly to
the Internet via the satellite without a telephone connection — need to be
checked periodically to be sure that the satellite dish alignment remains correct.
Satellite dishes may become misaligned because of structures settling,
unauthorized tampering or, more commonly, high winds.
the Internet via the satellite without a telephone connection — need to be
checked periodically to be sure that the satellite dish alignment remains correct.
Satellite dishes may become misaligned because of structures settling,
unauthorized tampering or, more commonly, high winds.
If the satellite dish alignment is not correct, transmissions from your equipment
might interfere with other users of the satellite, and your signal might be weak.
might interfere with other users of the satellite, and your signal might be weak.
The means used in the satellite industry to check transmit satellite dish
alignment is cross polarization co-polarization isolation measurement or
cross pol for short. Until recently cross pol measurements could only be made
by satellite maintenance personnel.
alignment is cross polarization co-polarization isolation measurement or
cross pol for short. Until recently cross pol measurements could only be made
by satellite maintenance personnel.
Your ACP-equipped system can enter a test mode and initiate an automatic cross
pol test session between your satellite dish and the Network Operations Center
(NOC). The test is performed by firmware in the satellite equipment, not on
your PC. Since your PC is not involved, the test cannot compromise the security
of your system.
pol test session between your satellite dish and the Network Operations Center
(NOC). The test is performed by firmware in the satellite equipment, not on
your PC. Since your PC is not involved, the test cannot compromise the security
of your system.
If your equipment fails a periodic test, your service provider will contact you to
schedule a service call. Other ACP features such as the Antenna Pointing -
schedule a service call. Other ACP features such as the Antenna Pointing -