HGST TRAVELSTAR 80GN 30GB ATA5 08K0910 User Manual

Travelstar 80GN Hard Disk Drive Specification

33 

The drive will operate in all axes (six directions) and will stay within the specified error rates when tilted ±5degrees 
from these positions.

Performance and error rate will stay within specification limits if the drive is operated in the other permissible ori-
entations from which it was formatted. Thus a drive formatted in a horizontal orientation will be able to run verti-
cally and vice versa.

The recommended mounting screw torque is 3.0±0.5 kgf-cm.

The recommended mounting screw depth is 3.0±0.3 mm for bottom and 3.5±0.5 mm for horizontal mounting.

The user is responsible for using the appropriate screws or equivalent mounting hardware to mount the drive 
securely enough to prevent excessive motion or vibration of the drive at seek operation or spindle rotation.

The head load/unload mechanism is provided to protect the disk data during shipping, movement, or storage. Upon 
power down, a head unload mechanism secures the heads at the unload position. See Section 6.5.4, “Nonoperating 
shock” on page 35 for additional details.

All vibration and shock measurements in this section are for drives without mounting attachments for systems. The 
input level shall be applied to the normal drive mounting points.Vibration tests and shock tests are to be conducted 
by mounting the drive to a table using the bottom four mounting holes.

The drive will operate without a hard error while being subjected to the following vibration levels.

The test consists of 30 minutes of random vibration using the power spectral density (PSD) levels below. The 

vibration test level is 6.57 m/sec

2 

RMS (Root Mean Square) (0.67 G RMS).

5

1.9 x 10-3

17

1.1 x 10-1

45

1.1 x 10-1

48

7.7 x 10-1

62

7.7 x 10-1

65

9.6 x 10-2

150

9.6 x 10-2

200

4.8x 10-2

500

4.8 x 10-2