HGST TRAVELSTAR 80GN 30GB ATA5 08K0910 User Manual
Product codes
08K0910
Travelstar 80GN Hard Disk Drive Specification
78
11.8.6 S.M.A.R.T. operation with power management modes
The device saves attribute values automatically on every head unload timing except the emergency unload, even if
the attribute auto save feature is not enabled. The head unload is done not only by Standby, Standby Immediate,
Sleep command, and Hard Reset, but also by the Standby timer. So it is not necessary for a host system to enable
the attribute auto save feature when it utilizes the power management. If the attribute auto save feature is enabled,
attribute values will be saved after 30 minutes have passed since the last saving, besides above condition.
the attribute auto save feature is not enabled. The head unload is done not only by Standby, Standby Immediate,
Sleep command, and Hard Reset, but also by the Standby timer. So it is not necessary for a host system to enable
the attribute auto save feature when it utilizes the power management. If the attribute auto save feature is enabled,
attribute values will be saved after 30 minutes have passed since the last saving, besides above condition.
11.9 Security Mode Feature Set
Security Mode Feature Set is a powerful security feature. With a device lock password, a user can prevent
unauthorized access to a device even if it is removed from the computer.
unauthorized access to a device even if it is removed from the computer.
New commands are supported for this feature as listed below:
11.9.1 Security mode
The following security modes are provided:
11.9.2 Security level
The following security levels are provided:
Security Set Password
('F1'h)
Security Unlock
('F2'h)
Security Erase Prepare
('F3'h)
Security Erase Unit
('F4'h)
Security Freeze Lock
('F5'h)
Security Disable Password
('F6'h)
Device Locked
Mode
Mode
The device disables media access commands after power on. Media access
commands are enabled by either a Security Unlock command or a Security Erase
Unit command.
commands are enabled by either a Security Unlock command or a Security Erase
Unit command.
Device Unlocked
Mode
Mode
The device enables all commands. If a password is not set this mode is entered after
power on, otherwise it is entered by a Security Unlock or a Security Erase Unit
command.
power on, otherwise it is entered by a Security Unlock or a Security Erase Unit
command.
Device Frozen Mode
The device enables all commands except those which can update the device lock
function, set/change password. The device enters this mode via a Security Freeze
Lock command. It cannot quit this mode until power off.
function, set/change password. The device enters this mode via a Security Freeze
Lock command. It cannot quit this mode until power off.
High level security
When the device lock function is enabled and the User Password is forgotten, the
device can be unlocked via a Master Password.
device can be unlocked via a Master Password.
Maximum level
security
security
When the device lock function is enabled and the User Password is forgotten,
then only the Master Password with a Security Erase Unit command can unlock
the device. Then user data is erased.
then only the Master Password with a Security Erase Unit command can unlock
the device. Then user data is erased.