ONKYO ABX-N300 User Manual
En-
25
Using the Timers (remote controller only)
—Continued
6
Use the []/[] buttons to select “Everyday”
or “Every,” and press the [ENTER] button.
or “Every,” and press the [ENTER] button.
If you selected “Everyday,” proceed to step
8
.
7
If you selected “Every,” use the []/[]
buttons to move to the day of the week that
you don’t want the timer to operate, and use
the []/[] buttons to make an underline
character appear. When you’ve finished
making the desired setting for each day of
the week, press the [ENTER] button.
The timer will not operate on days of the week that
are shown as an underline character. If you want
the timer to operate on a certain day of the week,
use the []/[] buttons to change the underline
character back to the weekday indication.
buttons to move to the day of the week that
you don’t want the timer to operate, and use
the []/[] buttons to make an underline
character appear. When you’ve finished
making the desired setting for each day of
the week, press the [ENTER] button.
The timer will not operate on days of the week that
are shown as an underline character. If you want
the timer to operate on a certain day of the week,
use the []/[] buttons to change the underline
character back to the weekday indication.
8
Use the []/[] buttons to specify the
playback volume, and press the [ENTER]
button.
The timer indication and number will appear in the
upper right of the clock display; then after a time,
the ABX-N300 will switch to standby mode.
playback volume, and press the [ENTER]
button.
The timer indication and number will appear in the
upper right of the clock display; then after a time,
the ABX-N300 will switch to standby mode.
Caution
In order for the timer to operate, the ABX-N300
must be in standby mode.
must be in standby mode.
Cancelling without setting the timer
Press the [TIMER] button. You’ll return to standby
mode.
Press the [TIMER] button. You’ll return to standby
mode.
Returning to the previous screen
Press the [] button.
Press the [] button.
Checking the timer setting
Press the [TIMER] button, then select “Timer1 Setup” or
“Timer2 Setup” and press the [ENTER] button
repeatedly to check the settings.
Press the [TIMER] button, then select “Timer1 Setup” or
“Timer2 Setup” and press the [ENTER] button
repeatedly to check the settings.
1
Press the [TIMER] button.
2
Use the []/[] buttons to select “Timer1
Setup” or “Timer2 Setup,” and press the
[ENTER] button.
Setup” or “Timer2 Setup,” and press the
[ENTER] button.
3
Use the []/[] buttons to select “On” or
“Off,” and press the [ENTER] button.
“Off,” and press the [ENTER] button.
4
Press the [TIMER] button.
The clock will be displayed for a short time, and
then the ABX-N300 will enter standby mode.
The clock will be displayed for a short time, and
then the ABX-N300 will enter standby mode.
When the timer has initiated playback, you can
temporarily stop playback by using the Snooze function;
playback will resume five minutes later.
temporarily stop playback by using the Snooze function;
playback will resume five minutes later.
To use the snooze function
During playback that has been started by the timer, press
the [SNOOZE] button.
During playback that has been started by the timer, press
the [SNOOZE] button.
Playback will temporarily stop, and will resume five
minutes later.
minutes later.
The sleep timer automatically puts the ABX-N300 in
standby mode after the specified duration has elapsed.
standby mode after the specified duration has elapsed.
Press the [SLEEP] button.
The display will indicate “Sleep 90 min.” Each time you
press the [SLEEP] button, the setting will change in ten-
minute steps in the range of “Sleep 90 min” - “Sleep
10 min.” When the specified duration has elapsed, the
power will turn off.
The display will indicate “Sleep 90 min.” Each time you
press the [SLEEP] button, the setting will change in ten-
minute steps in the range of “Sleep 90 min” - “Sleep
10 min.” When the specified duration has elapsed, the
power will turn off.
Checking the remaining time
When you press the [SLEEP] button, the display will
indicate the time remaining until the power will turn off.
However if the remaining time is less than ten minutes,
pressing the [SLEEP] button once again will cancel the
Sleep timer.
When you press the [SLEEP] button, the display will
indicate the time remaining until the power will turn off.
However if the remaining time is less than ten minutes,
pressing the [SLEEP] button once again will cancel the
Sleep timer.
Cancelling the sleep timer
Repeatedly press the [SLEEP] button until the “Sleep
Off” indication appears.
Repeatedly press the [SLEEP] button until the “Sleep
Off” indication appears.
Timer1 Setup
Every
MoTuWeThFrSaSu
Timer1 Setup
Every
TuWeThFrSaSu
Switching the Timer On (active) / Off
(disabled)
(disabled)
Using the Snooze Function
Using the Sleep Timer