Sony PCG-R505JSP Manual
VAIO® R505 SuperSlim Pro™ Notebook Quick Start
72
Verify that your AOL connection still functions satisfactorily with the WAN
Network Driver disabled. If you need to reverse this setting, repeat the steps
above and select Enable.
Network Driver disabled. If you need to reverse this setting, repeat the steps
above and select Enable.
What software do I use for CD-R/CD-RW software functions?
Sony recommends using the preinstalled SonicStage software’s Record function
to create any CDs on your VAIO® computer, if the specific model you purchased
is preconfigured with all necessary components for CD-R and CD-RW
capability.
to create any CDs on your VAIO® computer, if the specific model you purchased
is preconfigured with all necessary components for CD-R and CD-RW
capability.
Downloading the optional RealJukebox CD-burning component to create any
CDs on your computer may interfere with normal system operations.
CDs on your computer may interfere with normal system operations.
Troubleshooting i.LINK Devices
I cannot establish a connection between two VAIO computers when using an
i.LINK cable.
i.LINK cable.
1
Disconnect the i.LINK
*
cable from both computers and reconnect it.
2
Wait for the computers to respond. If neither computer responds after a few
moments, restart both computers.
moments, restart both computers.
Troubleshooting the Modem
My modem does not work.
❑
Check that the phone line is plugged into the line jack. See “Using a Phone
Line” in the online user guide for more information.
Line” in the online user guide for more information.
* i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394
connection. The i.LINK connection may vary, depending on the software applications, oper-
ating system, and compatible i.LINK devices. All products with an i.LINK connection may
not communicate with each other. Refer to the documentation that came with your compati-
ble i.LINK device for information on operating conditions and proper connection. Before
connecting compatible i.LINK PC peripherals to your system, such as CD-RW or hard disk
drive, confirm their operating system compatibility and required operating conditions.
ating system, and compatible i.LINK devices. All products with an i.LINK connection may
not communicate with each other. Refer to the documentation that came with your compati-
ble i.LINK device for information on operating conditions and proper connection. Before
connecting compatible i.LINK PC peripherals to your system, such as CD-RW or hard disk
drive, confirm their operating system compatibility and required operating conditions.
✍
The computers may not recognize an i.LINK connection after returning from a power
saving mode (Standby or Hibernate). If that happens, restart both computers to
establish a connection.
saving mode (Standby or Hibernate). If that happens, restart both computers to
establish a connection.