Barco 6MP User Manual
Coronis Fusion 4MP/6MP
21
First time starting up
You are now ready to start up your C
ORONIS
F
USION
4MP/6MP display
system for the first time.
1
Switch on your C
ORONIS
F
USION
4MP/6MP display as described in
2
Turn on the computer connected to your display.
If you have properly installed your display and display controller, the
Windows start-up messages will appear once the boot procedure is
finished.
Windows start-up messages will appear once the boot procedure is
finished.
Your C
ORONIS
F
USION
4MP/6MP display will be running in a basic
video mode at a default refresh rate when first time starting
up.
If you are using a Barco display controller, please consult the
dedicated user guide available on the system CD to install the
drivers, software and documentation. When this is done, your
display will automatically detect the connected video input
signal(s) and apply the correct video mode and refresh rate.
up.
If you are using a Barco display controller, please consult the
dedicated user guide available on the system CD to install the
drivers, software and documentation. When this is done, your
display will automatically detect the connected video input
signal(s) and apply the correct video mode and refresh rate.