Barco 6MP User Manual
22
Coronis Fusion 4MP/6MP
Daily operation
Recommendations for daily operation
O
PTIMIZE
THE
LIFETIME
OF
YOUR
DISPLAY
Enabling the Display Power Management System (DPMS) of your display
will optimize its diagnostic lifetime by automatically switching off the
backlight when the display is not used for a specified period of time. By
default, DPMS is enabled on your display, but it also needs to be
activated on your workstation. To do this, go to “Power Options
Properties” in the “Control Panel”.
will optimize its diagnostic lifetime by automatically switching off the
backlight when the display is not used for a specified period of time. By
default, DPMS is enabled on your display, but it also needs to be
activated on your workstation. To do this, go to “Power Options
Properties” in the “Control Panel”.
U
SE
A
SCREEN
SAVER
TO
AVOID
IMAGE
RETENTION
Prolonged operation of an LCD with the same content on the same
screen area may result in a form of image retention.
screen area may result in a form of image retention.
You can avoid or significantly reduce the occurrence of this phenomenon
by using a screen saver. You can activate a screen saver in the “Display
properties” window of your workstation.
by using a screen saver. You can activate a screen saver in the “Display
properties” window of your workstation.
In case you are working with the same image or an application with
static image elements for several hours continuously (so that the screen
saver is not activated), change the image content regularly to avoid
image retention of the static elements.
static image elements for several hours continuously (so that the screen
saver is not activated), change the image content regularly to avoid
image retention of the static elements.
U
NDERSTAND
PIXEL
TECHNOLOGY
LCD displays use technology based on pixels. As a normal tolerance in
the manufacturing of the LCD, a limited number of these pixels may
remain either dark or permanently lit, without affecting the diagnostic
the manufacturing of the LCD, a limited number of these pixels may
remain either dark or permanently lit, without affecting the diagnostic
Barco recommends setting DPMS activation after 20 minutes of
non-usage.
non-usage.
Barco recommends setting screen saver activation after 5
minutes of non-usage. A good screen saver displays moving
content.
minutes of non-usage. A good screen saver displays moving
content.