Avaya Wireless AP-3 User Manual
Interfaces
Avaya Wireless AP-3 User’s Guide 4-51
Ethernet
Select the desired speed and transmission mode from the drop-down
menu. Half-duplex means that only one side can transmit at a time and
full-duplex allows both sides to transmit. When set to auto-duplex, the AP
negotiates with its switch or hub to automatically select the highest
throughput option supported by both sides.
menu. Half-duplex means that only one side can transmit at a time and
full-duplex allows both sides to transmit. When set to auto-duplex, the AP
negotiates with its switch or hub to automatically select the highest
throughput option supported by both sides.
For best results, Avaya recommends that you configure the Ethernet
setting to match the speed and transmission mode of the device the
Access Point is connected to (such as a hub or switch). If in doubt, leave
this setting at its default, auto-speed-auto-duplex. Choose between:
setting to match the speed and transmission mode of the device the
Access Point is connected to (such as a hub or switch). If in doubt, leave
this setting at its default, auto-speed-auto-duplex. Choose between:
• 10 Mbit/s - half duplex, full duplex, or auto duplex
• 100 Mbit/s - half duplex or full duplex
• auto speed - half duplex or auto duplex