Avaya Wireless AP-3 User Manual

Avaya Wireless AP-3 User’s Guide                                                                                 4-53

The Management IP Access table limits in-band management access to 
the IP addresses or range of IP addresses specified in the table. This 
feature applies to all management options (SNMP, HTTP, and CLI) except 
for CLI management over the serial port. To configure this table, click Add 
and set the following parameters:

•  IP Address: Enter the IP Address for the management station.

•  IP Mask: Enter a mask that will act as a filter to limit access to a 

range of IP Addresses based on the IP Address you already 
entered.

HTTP (Web) 
Password

For the Web browser HTTP interface. Enter 
a password in both the Password field and 
the Confirm field. The default password is 
“public”.

NOTE:
For security purposes Avaya recommends changing ALL 
PASSWORDS from the default “public” immediately, to restrict 
access to your network devices to authorized personnel. If you 
lose or forget your password settings, you can always perform 
the 

.