Avaya Wireless AP-3 User Manual
Recovery Procedures
Avaya Wireless AP-3 User’s Guide 7-21
Download Procedure
Follow these steps to use ScanTool to download a software image to an
Access Point with a missing image:
Access Point with a missing image:
1. Download the latest software from
.
2. Copy the latest software updates to your TFTP server.
3. Launch ScanTool.
4. Highlight the entry for the AP you want to update and click
Change.
5. Set IP Address Type to Static.
NOTE:
You need to assign static IP information temporarily to the
Access Point since its DHCP client functionality is not available
when no image is installed on the device.
You need to assign static IP information temporarily to the
Access Point since its DHCP client functionality is not available
when no image is installed on the device.
6. Enter an unused IP address that is valid on your network in the IP
Address field. You may need to contact your network
administrator to get this address.
administrator to get this address.
7. Enter the network’s Subnet Mask in the field provided.
8. Enter the network’s Gateway IP Address, if necessary. You may
need to contact your network administrator to get this address. You
should only need to enter the default gateway address if the
Access Point and the TFTP server are separated by a router.
should only need to enter the default gateway address if the
Access Point and the TFTP server are separated by a router.
9. Enter the IP address of your TFTP server in the field provided.