Avaya Wireless AP-3 User Manual
Other Network Settings
A-48 Avaya Wireless AP-3 User’s Guide
Maintain Client Connections using Link Integrity
[Device Name]>show linkinttbl (this shows the current links)
[Device Name]>set linkinttbl <1-5
[Device Name]>set linkinttbl <1-5
(depending on what table row
you wish to address)>
ipaddr <ip address of the host computer you want to
check>
[Device Name]>set linkintpollint <the interval between link
integrity checks>
[Device Name]>set linkintpollretx <number of times to retransmit
before considering
ipaddr <ip address of the host computer you want to
check>
[Device Name]>set linkintpollint <the interval between link
integrity checks>
[Device Name]>set linkintpollretx <number of times to retransmit
before considering
the link down>
[Device Name]>set linkintstatus enable
[Device Name]>show linkinttbl (confirm new settings)
[Device Name]>reboot 0
[Device Name]>show linkinttbl (confirm new settings)
[Device Name]>reboot 0
Change your Wireless Interface Settings
See
for information on the parameters listed below.
Single-radio APs use index 3. Dual-radio APs use index 3 for Slot A and
index 4 for Slot B.
index 4 for Slot B.