Avaya Wireless AP-3 User Manual
Other Network Settings
A-50 Avaya Wireless AP-3 User’s Guide
Enable/Disable Load Balancing (802.11b Only)
[Device Name]>set wif <index> ldbalance <enable/disable>
Enable/Disable Medium Density Distribution (802.11b Only)
[Device Name]>set wif <index> meddendistrib <enable/disable>
Set the Distance Between APs (802.11b Only)
[Device Name]>set wif <index> distaps <large, medium, small,
minicell, microcell>
[Device Name]>reboot 0
NOTE:
The distance between APs should not be approximated. It is
calculated by means of a manual Site Survey, in which an AP is set
up and clients are tested throughout the area to determine signal
strength and coverage, and local limits such as physical
interference are investigated. From these measurements the
appropriate cell size and density is determined, and the optimum
distance between APs is calculated to suit your particular business
requirements.
The distance between APs should not be approximated. It is
calculated by means of a manual Site Survey, in which an AP is set
up and clients are tested throughout the area to determine signal
strength and coverage, and local limits such as physical
interference are investigated. From these measurements the
appropriate cell size and density is determined, and the optimum
distance between APs is calculated to suit your particular business
requirements.