Buffalo Technology WLM2-G54 User Manual

1. Click the "Management" to open the next

page.

2. Click the "Time Settings" menu on the left

(menu section) to set the current time.
Click Set.

3. Click the "LAN Setup" menu on the left;

then click the "Wireless" menu.

4. Enter appropriate ESS-ID and channel

number. (see previous page)
■ Note: ESS-IDs are case sensitive, up to
32 alphanumeric characters in length.

5. Select WEP Enable box.  Enter appropriate

WEP key on line 1. Click Set. Click Set
again.

6. Click the "Network Setup" menu on the

left.

7. If you want to use the Agent Function,

check "On" and input the WLM2-G54’s
location, and Administrator Information.
Click Set.

8. If the WLM2-G54 is operated in a large

network environment, using a pre-
determined name identification system may
be recommended, to help identify the
WLM2-G54 easily.  In order to set the
name, click the "Host Setup" menu to open
the basic setup page.  Type an appropriate
name in the "AirStation Name" box. Click
Set.

9. On the LAN Port page, you may opt to

obtain the IP address from the DHCP
server or enter a static IP address manually
for the access point.  If you are given a
default gateway IP from your ISP, input that
address.  If it is not given to you, leave the
box empty.  Click Set.

1. Use the serial cable provided to connect

the WLM2-G54 to the PC’s COM port.

2. Start the Hyper Terminal software included

in the Windows OS.  Hyper Terminal is a
standard software in Windows but it is

Figure 8.6.7  SNMP Function

Figure 8.6.9  DHCP and manual IP configuration