Buffalo Technology WLM2-G54 User Manual

Manager or Terminal Software setup
screen.

4. When login prompt appears, enter “root”

as a default login name.

5. Input "?"/press "Enter" to view list of

commands.

Although your AirStation will work fine in
most network environments, you may wish
to explore the advanced options.  This
chapter explains each parameter in the setup
screen.

Basic Settings includes the following
parameters:

AirStation Name

Connection type

IP address

Default Gateway

DNS Server

9.2.1 AirStation Name

A unique name can be set for your AirStation
in order for clients to recognize it.  It identifies
each access point when multiple access points
are present.  Although it is not necessary to
set this parameter, it can be useful.  Once it is
set, the name will be shown at the top of the
initial setup screen.

9.2.2 Connection type

The following options are possible for the
wired LAN port setting:

10 Mbps Half Duplex

100 Mbps Half Duplex

Auto

If the port on the LAN hub is set to Full
Duplex, set the WLM2-G54 to Auto.

9.2.3 IP Address

If you do not use a DHCP server on your
network, you have to assign an IP address
manually.  A specific IP address should be
obtained for this.  You can use DHCP by
selecting "auto IP assignment from DHCP
Server."

9.2.4 Default Gateway

A default gateway IP should be assigned to
the AirStation.  If the gateway IP is unknown,
leave the box blank.  If "Auto IP assignment
from DHCP Server" is selected, the gateway
IP will be assigned automatically.

9.2.5 DNS Server

Input the IP address of the server to be used
by the WLM2-G54 for DNS resolution.  If
DNS is not used, leave blank.

Figure 9.3  Time Settings