Avocent MPX1000 User Manual
Chapter 4: Additional Functions 47
Parameter modification
While you are in Parameter Modification mode, the button definitions are as follows:
Table 4.5: Buttons for Parameter Modification Mode
Button
Description
Up
Changes the parameter value to the next valid value in the upward direction.
Note: While in this mode, the
S symbol is displayed in the lower right character
position of the display to indicate that pressing the Up button will increase the value
of the parameter.
of the parameter.
Down
Changes the parameter value to the next valid value in the downward direction.
Note: While in this mode, the
T symbol is displayed in the lower right character
position of the display to indicate that pressing the Down button will decrease the
value of the parameter.
value of the parameter.
Left, Center
or Right
or Right
Switches the display mode back to the Manual Menu Navigation mode. The front
panel display will continue to show the current menu item.
panel display will continue to show the current menu item.
Note: While in this mode, a
X symbol is displayed in the upper right character
position of the display to indicate that selection is possible for this menu item. If no
X
symbol appears in the display, this menu item is not selectable, and pressing the
Center (or Right) button has no effect for this menu item.
Center (or Right) button has no effect for this menu item.
Left
Goes back to the previous menu. For example, pressing the Left button will undo the
action previously initiated by pressing the Center (or Right) button.
action previously initiated by pressing the Center (or Right) button.
Main menu
The top level menu selections for the front panel display are as follows:
•
Display Rx Status
•
Display Tx Settings
•
Configure Control LAN
To scroll through these top level menu selections when the Avocent logo is present, press any of
the four arrow buttons. To navigate through these items, press the
the four arrow buttons. To navigate through these items, press the
Up
or
Down
buttons. To select
and display a corresponding sub-menu, press the
Center
or
Right
buttons. Press the
Left
button to
return the front panel display to the Avocent logo.
Display Rx status
The sub-menu for this selection provides continually updated real-time receiver status. The
following information is provided:
following information is provided:
•
Receiver identification: MAC address and friendly name