Panasonic WV-CU650 User Manual

30

■ If You Have Forgotten the Login

Refer to the system administrator.

■ Operation Start (Auto Login)

When auto login is set to ON, operators can log into the
system without entering their passwords. The LCD display
after power-on becomes as follows. (Refer to p. 61 for
details on the setting.)

1. When the power is turned on, “Auto Login” appears on

the LCD for a second.

2. The user ID of auto login user appear on the LCD.

Then, the operator will log into the system automatically.

• This illustration is an example in which the operator

number is “650”.

• The smallest monitor, camera, and unit numbers are

displayed on the LCD.

• Three seconds after the unit number was deter-

mined, model number appears in place of unit num-
ber.

• Due to security, the password is not displayed on

the LCD.

■ Operation End (Logout)

You need to log out from the system:

• When finishing operation and turning off the power
• When changing an operator

1. During the login status, press the LOGOUT button while

holding down the SHIFT button.

2. You will log out of the system, and "Logout" will appear

on the LCD. Then, the LCD returns to the login standby
display.

Alarm sign after logout
If power is being supplied even after logout, the current
system status will be continuously informed by “Alarm sign”
and the ALM SUSPEND indicator. If an alarm is newly acti-
vated after logout, “Alarm” sign will blink. (The blinking will
change to steady light when the alarm is automatically
reset.)

PS Data Mode

Auto Login

•

Mon01 Cam128  Unit16

  F1   F2   F3   F4

Mon01 Cam128   HD316

  F1   F2   F3   F4

PS·Data Mode

User ID     =  650

PS·Data Mode

No User

       Logout