Panasonic WV-CU650 User Manual

31

■ Recorder Selection

• In advance, you need to set HDD-unit maps. (Refer to

p. 67 Associating Recorder Numbers with Unit
Numbers.)

• In the factory default, Recorder 1 to 16 is associated

with Unit 1 to 16.

1. Enter a recorder number by pressing numeric buttons.

The entered number will appear on the LCD.

2. Press the RECORDER/UNIT button. The system will

become ready for control, and the monitor number,
camera number, and system unit number will appear on
the LCD. 

• Three seconds after, model number will appear in

place of unit number.

• If you have entered a wrong recorder number,

“Invalid” will appear on the LCD. Then, the LCD will
return to the status before the recording selection.

To control the system, you need to select a desired unit
(system unit, recorder, monitor, or camera) at the begin-
ning.

■ System Unit Selection

• In advance, you need to set the unit number for each

system unit. (Refer to the operating instructions of sys-
tem units.)

• 1 to 99 are available for the unit number.

1. Enter a unit number by pressing the numeric buttons.

The entered number will appear on the LCD.

2. Press the RECORDER/UNIT button while holding down

the SHIFT button. The system will become ready for
control. Then, the monitor number, camera number,
and system unit number will appear on the LCD. 

• Three seconds after, model number will appear in

place of unit number. To display the unit number
again, hold down the RECORDER/UNIT.

• If you have entered a wrong unit number, “Invalid”

will appear on the LCD. Then, the LCD will return to
the status before the system unit selection.

Mon01 Cam016   ___16

  F1   F2   F3   F4

Mon02 Cam128   ____2

  F1   F2   F3   F4

Mon02 Cam016   HD316

  F1   F2   F3   F4

      Invalid

      Invalid

Mon02 Cam016  Unit16

  F1   F2   F3   F4

Mon02 Cam016  Unit16

  F1   F2   F3   F4

Mon02 Cam016   HD316

  F1   F2   F3   F4