Trendnet 18-1106-33 User Manual
1. Introduction and 2. Safety information
1. Introduction
MultiTemp
®
III circulates constant temperature liquid to
external electrophoresis equipment. The liquid temperature
range is -10 to +90 °C. The unit contains KLEA 134a*, an
ozone friendly HFC-type coolant.
range is -10 to +90 °C. The unit contains KLEA 134a*, an
ozone friendly HFC-type coolant.
MultiTemp III both supplies coolant for high voltage techni-
ques and provides temperature control at higher temperature
(e.g. 60 °C) when performing DNA sequencing. When used
with equipment such as the Pharmacia Biotech Multiphor
ques and provides temperature control at higher temperature
(e.g. 60 °C) when performing DNA sequencing. When used
with equipment such as the Pharmacia Biotech Multiphor
®
II
electrophoresis unit, two units can be connected to
MultiTemp III at the same time.
MultiTemp III at the same time.
MultiTemp III can also be used as a stand-alone constant
temperature water bath.
temperature water bath.
*KLEA 134a is the Trademark of ICI.
2. Safety information
Read this entire manual before using MultiTemp III.
1. This instrument is designed for indoor use only.
2. The unit must be connected to a grounded mains socket.
3. Ensure that the vents at the sides of the instrument are not
covered.
covered.
4. Do not use in a dusty atmosphere or close to spraying
water.
water.
5. Set the temperature limit cut-off correctly.
6. Use only water or water with ethylene glycol in the bath.
3
2.1 Safety
precau-
tions
tions