Nortel Networks 2750 User Manual
Chapter 2 Cabling the VPN Router and turning the power on 43
Nortel VPN Router Installation — VPN Router 2750
1000BASE-T (1000 GT) Ethernet interface card LEDs
The following figure shows the LEDs on the 10BASE-T/100BASE-TX/
1000BASE-T 1000 GT Ethernet interface card.
1000BASE-T 1000 GT Ethernet interface card.
Figure 11
LEDs on the 1000 GT Ethernet interface card
The following table describes the LEDs on the 1000 GT Ethernet interface card.
1000BASE-T (1000 MT) Ethernet interface card LEDs
shows the LEDs on the 1000BASE-T Ethernet interface card.
Table 7
LED indicators on the 1000 GT Ethernet interface card
LED
Indicator
Description
ACT/LINK
Steady green
The port is connected to a valid link partner.
Flashing green
The card is sending or receiving network data. The
frequency of the flashes increases with increased
traffic.
Off
The card is not sending or receiving data.
10/100/1000
Yellow
The port is operating at 1000 Mb/s.
Green
The port is operating at 100 Mb/s.
Off
The port is operating at 10 Mb/s.