Nortel Networks 2750 User Manual
Chapter 2 Cabling the VPN Router and turning the power on 41
Nortel VPN Router Installation — VPN Router 2750
LEDs on the system 10/100BASE-TX Ethernet ports
Each of the two 10/100BASE-TX Ethernet ports on the rear of the VPN Router
2750 has two LEDs
2750 has two LEDs
.
Figure 9
LEDs on the system 10/100BASE-TX Ethernet ports
describes the LEDs on the system 10/100BASE-TX Ethernet ports.
Table 5
LED indicators on the system 10/100BASE-TX Ethernet ports
LED
Indicator
Description
Green
On
The LAN port is operating at 100 Mb/s.
Off
The LAN port is operating at 10 Mb/s.
Yellow
On
The cable connections between the LAN port and the
hub are good.
Off
The cable connections between the LAN port and the
hub are faulty.
Flashing
The LAN port is sending or receiving network data.
The frequency of the flashes increases with
increased traffic.
CS260011A
Green
Yellow